The Osh-kosh 1070M is a unique and iconic military semi truck capable of hauling massive loads. This model, in 1/14 scale, is made to be as realistic as possible, but with the goal to make it as easy to assemble to anyone with the clear and detailed 56 page assembly manual.
This is the kit version of the Osh-kosh 1070M, so it comes with all the electronics except the battery (I include in your kit a couple of references to which one to buy), as well as the receiver and the transmitter (the choice is up to you, but you need to have at least 4 channels). To know more about the kit, read the "Item Details" section in which it is all described.
***If you have difficulties with the shipping (or with the shipping cost), contact us and we will do our best to help you.
Its suspension springs are made to be able to haul 60lbs (and that's only on the truck, so it can haul much more with the weight distributed on a trailer).
The three rear axles are powered by a worm gear motor (worm gear dc motor 12V 400RPM). Also, there are two options for the axles. The first option is to use metal axles, and the second option, the economic one, is to assemble the axles yourself, with the case of the axles being printed and all the other parts are metal parts, included in the kit.
The connection plate to connect trailers is actuated by a small servo motor under the covering plate in the back of the truck, so it can connect/disconnect trailers remotely.
You can choose to take the dolly adapter with it or not, as it is used for connecting the Osh-kosh 1070M to normal 1/14 trailers. It uses the same suspension as the Osh-kosh 1070M, but its connection plate (which is also powered by a small servo) is lower from the ground in order to meet the 1/14 normal trailer connecting pin height. The Osh-kosh 1070M has a higher connection plate since it is hauls heavy military trailers, so the dolly adapter is made for the normal civil trailers. The famous M1000 military trailer (coming this automn) is made to fit the connection plate of this truck, as well as the missile launcher (coming later this year)
If you have issues like us to often get your equipment upside down, this truck is equipped with a winch powered by a 35kg servo. The winch on the driver side of the Osh-kosh 1070M is the powered one, while the one on the other side is a decoration.
RC Kit - Osh-kosh 1070M 1/14
- This rc truck is a replica of the Osh-kosh 1070M in 1/14 scale.
- Article content: RC Kit - Osh-kosh 1070M.
- This article is sold as a kit, meaning that all the parts as well as the motors and electronic components are supplied with an assembly manual so that you can assemble your vehicle with your own hands. All the parts are included except the battery (I include in your kit a couple of references to which one to buy), as well as the receiver and the transmitter (the choice is up to you, but you need to have at least 4 channels). To facilitate assembly, all electrical wires are previously cut to the correct length and are equipped with their connectors before sending your kit to you, which exempts you from these steps throughout the build, which are not easy to everyone.
- Approximate dimensions when assembled: Length: 66cm (26in) - Width: 20cm (8in) - Height: 26cm (10in).
- Plastic parts are made with 3D printers, which means that parts may vary slightly from each other. However, we certify that the parts provided in your kit meets our criteria in terms of quality and functionality.
- Filament used for the 3D printed parts: PLA (contact us if you need it in another material).
- Materials: Plastic (PLA), Metal (gears, beams, springs, etc.).
- Weight: Approximately ___ Lbs.